2013 Nissan Altima
Mileage
77,836
Service Date
3/6/2020
Services Performed
- Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: ok Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date code___________ Brake fluid ok PS fluid: ok Air filter: Not ok Belts: not ok – Needs to be Replaced Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Date codes: 2018 Tread depth – LF____6______RF__6________LR__6________RR___6_______ Air Pressure F=___35_______R=__35________ Visual Brake inspection F=____3mm____R=___5mm________ Oil Sticker: Door RESET OIL LIFE MONITOR___X______
- Complete hookup & analysis on Scope or Scanner 1. Confirm problem : Yes 2. Monitors : OK 3. Computer codes : OK 4. Mode 6 data: Pass 5. Visual test : OK 6. Engine vac. @ idle : N/A 7. Engine vac. @ 2500 : N/A 8. Smoke test : N/A 9. Diagnostics : Inspected for battery light on, found drive belt off, checked all pulleys IE A/C compressor, Alternator, Water pump all turn freely, Check belt tensioner it ok , Recommend Replace drive belt and recheck to make sure all pulleys are lined up 10. Confirm fix: YES Tire Pressure F= 35 R= 35 Complementary inspection Air filter – OK Cabin filter – OK Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Visual Brake inspection – F___3mm_______R_5mm________
- Found Serpentine belt freely inside engine compartment, Installed new Serpentine belt around pulleys secured belt. tested all is good at this time.
- Measure brake rotor size to determine that they are able to be machined. Machine rotors using a brake lathe. Turned Rotors, Installed brakes, test drove all good at this time.
- Removed Cabin filter from under dash. Cleaned area Installed new Cabin filter
Ed S. gave our service a 5 star review on 3/7/2020
