Call (760) 788-4912

Go to…

Honda

Home / Honda / Page 3

We Service and Repair all Honda cars

  • 2013 Honda CR-V

    Honda CR-V
    Mileage
    152,857
    Service Date
    12/19/2022
    Services Performed
    • Tire pressure
     
    Sandy B. gave our service a 5 star review on 12/20/2022

  • 2022 Honda Accord

    Honda Accord
    Mileage
    17,019
    Service Date
    11/11/2022
    Services Performed
    • Confirm Problem: Yes, front bumper was clipped back into place and front bumper lip was installed. No tabs found broken on bumper aside from a screw tab. Installed washer on screw and resecured bumper. Bumper is currently held tightly and tabs are clipped down. Installed lip and lined up with bumper as best as possible. Screwed into place with a couple extra screws. Currently everything is secured. Undercover tabs are broken in some areas and does seem to have some scraping.
     
    Neysa S. gave our service a 5 star review on 11/26/2022

  • 2007 Honda Odyssey

    Honda Odyssey
    Mileage
    102,255
    Service Date
    3/1/2021
    Services Performed
    • 1. Wash headlight lens to remove surface dirt OK 2. Mask off any areas to be protected OK 3. Apply compound over entire lens using firm pressure. OK 4. Buff W/clean cloth. OK 5. Dry the lens W/cotton towel. Apply lens clarifying compound and rub thoroughly back and forth until lens clarifies. Let compound dry to a haze and buff W/cotton cloth. OK 6. Apply lens sealing wipe, coat the newly restored lens. Coating will dry & cure within 24hrs. OK
    • Air filter – OK Cabin filter – OK Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Tire Pressure – 35 Tires – RF__7___LF___7___RR___8___LR__8____ Tire Date codes – 19 Visual Brake inspection – F___1mm____R____4mm____
    • Brake work recommended was performed, thus brake inpection fee is waived.
    • Inspected glove box. Removed mounting bolts off the bottom of glove box. Pushed latch down with a screwdriver and found arm inside latch assembly is bent, not allowing latch to open. Recommend replacing glove box latch assembly.
    • Measure brake rotors size to determine that they are able to be machined. Machine rotors using a brake lathe. Before machining size: 10.83 After machining size: 10.24
    • Pulse/Shimmy:Yes_____NO___X__Front_____Rear_____ Brake Pull: YES_________NO___X___ Brake Pads/Shoes: (MM) RF___1mm___LF____2mm______RR____4mm___LR__4mm____ Emergency Brake Shoes LR____5mm______ RR_____5mm____ Disc/Drum Front – Spec:___26mm___Rear – Spec_____9mm_____ RF___26.02_____LF____26.37____RR__10.83___LR___10.84____ After Machining: RF____N/A____LF___N/A_____RR____10.24____LR____10.18_____ Surface______Good_____________ Wheel Bearings: OK____X______Not ok_______ Hydrualics – Master Cyl: Ok___X__Not ok______ Front Calipers: OK____X_____Not OK_____ Rear Calipers / Wheel Cyls: OK____X_____Not ok______ Brake Lines: OK___X____Not ok________ Wheel Torque_____87______Ftlbs Tire Pressure – F= 35 R= 35 Brake Fluid Condition: OK__X___Not OK____ ppm =____N/A___ Front Suspension: OK___X__Not OK______ Rotor runout, if necessary: Rotor Parrelism, if necessary:
    • Removed tires. Removed front and rear brakes pads. Cleaned surrounding area. Cleaned and lubed brake pads. Installed new front and rear brake pads. Found front rotors just over minimum spec, if resurfaced, front rotors would be under the required thickness. Removed front rotors. Cleaned rotors and surrounding area. Installed new front brake rotors.
     
    Laura D. gave our service a 5 star review on 3/4/2021

  • 2007 Honda Odyssey

    Honda Odyssey
    Mileage
    101,849
    Service Date
    2/1/2021
    Services Performed
    • Air filter – OK Cabin filter – OK Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Tire Pressure – Tires – RF_____LF______RR______LR______ Tire Date codes – Visual Brake inspection – F__________R_________
    • Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: ok Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date code__NA_________ Brake fluid ok PS fluid: ok Air filter: ok Cabin Filter: OK Belts: ok Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Date codes: 2019 Tread depth – LF__6________RF___6_______LR___8_______RR____8______ Air Pressure F=__35________R=__35________ Visual Brake inspection F=___3__________ R=____3_______ Oil Sticker: Door RESET OIL LIFE MONITOR___YES______ Notes: Strut top plate noise on test drive?
    • Installed customer supplied glove box latch, after installing and closing door now latch not working. Customer said they will bring it back for us to repair.
    • POWER STEERING HOSE – Remove & Replace – Pressure
    • Put vehicle on rack to inspect and found the pressure side power steering hose leaking.
     
    Laura D. gave our service a 5 star review on 2/1/2021

  • 2018 Honda Civic

    Honda Civic
    Mileage
    38,280
    Service Date
    11/6/2020
    Services Performed
    • Called Honda and appears that this vehicle is covered by an extended warranty – 800-999-1009
     
    Marcelo P. gave our service a 5 star review on 11/6/2020

  • 2019 Honda HR-V

    Honda HR-V
    Mileage
    8,203
    Service Date
    10/2/2020
    Services Performed
    • Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: ok Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date ____________ Brake fluid ok PS fluid: ok Air filter: ok Cabin Filter: OK Belts: ok Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Tread depth – LF___8/32_______RF__8/32________LR___8/32_______RR____8/32______ Air Pressure F=__32________R=__32________ Visual Brake Inspection F__9mm____ R__9mm____ Oil Sticker: RESET OIL LIFE MONITOR___100%______
     
    Vicki S. gave our service a 5 star review on 10/15/2020

  • 2016 Honda Odyssey

    Honda Odyssey
    Mileage
    49,355
    Service Date
    6/19/2020
    Services Performed
    • Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: ok Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date code___16__ Brake fluid ok Hyd. clutch fluid: N/A PS fluid: ok Air filter: ok Cabin Filter: OK Belts: ok Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Date codes: 18 Tread depth – LF____9______RF_____9_____LR_____9_____RR____9______ Air Pressure F=__35___R=___35___ Visual Brake inspection F=____10mm___ R=___8mm___ Oil Sticker: Windshield RESET OIL LIFE MONITOR_________
     
    Bill G. gave our service a 5 star review on 6/19/2020

  • 2006 Honda Civic

    Honda Civic
    Mileage
    91,240
    Service Date
    4/2/2020
    Services Performed
    • Tire Pressure – 32
     
    Dennis P. gave our service a 5 star review on 4/4/2020

  • 2010 Honda CR-V

    Honda CR-V
    Mileage
    160,385
    Service Date
    9/9/2019
    Services Performed
    • After installation of new solenoid, set up programming station and connected programming equipment. Cleared all related codes and performed monitored road test. Reset all monitors and retested system. Vehicle currently operates as designed.
    • Complete hookup & analysis on CAS machine 1. Confirm problem : YES 2. CAS machine : Modis 3. Computer codes : P0497 and P145C 3.5 Mode 6 data: Pass/Fail – Info – Failed EVAP test 4. Visual test : Inspected EVAP system, tank, lines, solenoid and fuel cap 5. Engine vac. @ idle : N/A 6. Engine vac. @ 2500 : N/A 7. Engine timing @ idle : N/A 8. Engine timing @ 2500 : N/A 9. Smoke test : Yes, Passed 10. Diagnostics : P0497 EVAP,Low Purge Flow and P145C Purge Flow Fault Freeze Frame Data: 1350 RPMs 15.7% Throttle 634 Seconds since start 95 degrees IAT 195 degrees ECT 6.4 gls MAF 75% Fuel Level 42% Purge Data Cycle 21 MPA Tested canister vent valve- Pass Tested Fuel Pressure Sensor Pass 2.5 v (spec 2.46-2.56V) Pressure tested system, system holds pressure Tested canister purge valve. Inoperative. Tested power, 12.1 volts. Tested computer ground circuit .01 v. Computer is able to activate the circuit when commanded. Open circuit detected in the Purge Canister Solenoid. Recommend replacement of solenoid. 11. Confirm fix: YES Tire Pressure F= 30 R= 30 Complementary inspection Air filter – OK Cabin filter – Recommend replacement at next service Belts – OK Hoses – OK Engine oil – Slightly low, added oil Engine coolant – OK Tires – RF_8/32____LF_8/32_____RR___8/32___LR_8/32_____ Tire Date codes – 2019 Visual Brake inspection – F___6mm_______R__6mm_______
    • Removed all components to access purge control solenoid. Removed failed solenoid and installed new. Made all connections and assembled area.
     
    Jeff D. gave our service a 5 star review on 9/9/2019

  • 2017 Honda HR-V

    Honda HR-V
    Mileage
    15,290
    Service Date
    12/17/2018
    Services Performed
    • Balance tires – Yes Check Valve stems – NEW Visual brake inspection – F = 9 , R = 10 Tire Pressure – 32/30 Wheels torqued – 80 ft lbs Date Code – 2017/2018 Notes –
     
    Vicki S. gave our service a 5 star review on 12/19/2018