Dodge

Home / Dodge

We Service and Repair all Dodge cars

  • 2018 Dodge Challenger

    Dodge Challenger
    Mileage
    26,298
    Service Date
    10/25/2024
    Services Performed
    • Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: SEALED Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date code___N/A________ Brake fluid ok Air filter: ok Cabin Filter: OK Belts: ok Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Date codes: 2018 Tread depth(MM) – LF__6MM________RF___6MM_______LR___6MM_______RR__6MM________ Air Pressure F=__32________R=___32_______ Visual Brake inspection(MM) F=___10MM__________ R=__8MM_________ Oil Sticker: Door RESET OIL LIFE MONITOR__RESET
     
    Norman H. gave our service a 5 star review on 10/25/2024
  • 2006 Dodge Durango

    Dodge Durango
    Mileage
    129,212
    Service Date
    9/5/2024
    Services Performed
    • Pressure tested system – OK checked radiator cap – only holding 16lbs, replaced and tested ok Inspection found coolant recovery hose sliced and leaking, repaired and retested ok at this time. Topped off coolant. Temp @ idle hot just above 1/2 line 217 Complementary inspection Air filter – OK Cabin filter – OK Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Tire Pressure – Tires – RF_____LF______RR______LR______ Tire Date codes – Visual Brake inspection – F__________R_________
     
    Narinder S. gave our service a 5 star review on 9/23/2024
  • 2007 Dodge Pickup

    Dodge Pickup
    Mileage
    175,000
    Service Date
    10/20/2023
    Services Performed
    • P0048 & P0049 code present. Customer had new banks system installed and car and may need some time to clear codes out that it caused.
     
    Dave F. gave our service a 5 star review on 10/27/2023
  • 2018 Dodge Grand Caravan

    Dodge Grand Caravan
    Mileage
    64,654
    Service Date
    1/18/2023
    Services Performed
    • Battery Date code – 01/24/18 1. Battery voltage not loaded : 12.10V After repairs: 12.55V 2. Battery voltage loaded : 6.58V After repairs: 12.48V 3. Battery water : N/A 4. Battery specific gravity : N/A 5. Battery overall condition : 6. Battery cables condition : OK, NO CORROSION 7. Positive battery cable voltage drop : .5V 8. Negative battery cable voltage drop : .5V 9. Starter draw : 2.43 10. Starter Solenoid voltage drop : UNABLE TO ACCESS 11. Starter solenoid voltage : UNABLE TO ACCESS 12. Alternator voltage output @ idle : 14.32 After repairs: 14.54 13. Alternator voltage output @ 2500 : 14.34 After repairs: 14.52 14. Alternator voltage output loaded @ idle : 14.31 After repairs: 14.52 15. Alternator field voltage : 16. Alternator amperage output : 41.5 AMPS AT ABOUT 600-700 RPM 17. Alternator diode pattern : GOOD 18. Parasitic draw : .42 19. Diagnostics : PERFORMED A LOAD TEST ON BATTERY. FOUND BATTERY VOLTAGE DROPPED FROM 12.10V TO 8.5V WITH TESTER. FOUND BATTERY NOT HOLDING A CHARGE AND LOSES VOLTAGE FAIRLY QUICKLY. 20. Problem confirmed : YES
    • Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: SEALED Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date code:__01/24/18_________ Brake fluid ok Hyd. clutch fluid: N/A PS fluid: N/A Air filter: ok Cabin Filter: OK Belts: ok Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Date codes: 2012 & 2014 Tread depth – LF__2/32________RF__2/32________LR___8/32_______RR___7/32____ Air Pressure F=__36PSI________R=___36PSI_______ Visual Brake inspection F=_____7MM_____ R=__6MM___ Oil Sticker: Door RESET OIL LIFE MONITOR__YES_______
    • FOUND BATTERY NOT HOLDING A CHARGE AND FOUND BATTERY DROPPING FROM 12.10V TO 8.5V WITH LOAD TESTER. REPLACED BATTERY
     
    Normand R. gave our service a 5 star review on 1/19/2023
  • 2008 Dodge Caliber

    Dodge Caliber
    Mileage
    166,427
    Service Date
    10/4/2022
    Services Performed
    • Complete hookup & analysis on Scope or Scanner 1. Confirm problem : Yes 2. Monitors : Complete 3. Computer codes : P2004, P2118, P2110 4. Mode 6 data: Pass/Fail – Info – N/A 5. Visual test : N/A 6. Engine vac. @ idle : N/A 7. Engine vac. @ 2500 : N/A 8. Smoke test : N/A 9. Diagnostics : SCANNED FOR CODES AND FOUND P2004- INTAKE MANIFOLD RUNNER CONTROL STUCK OPEN, P118- ELECTRONIC THROTTLE CONTROL MOTOR CURRENT PERFORMANCE BANK 1 AND P2110- ELECTRONIC THROTTLE CONTROL SYSTEM BANK 1 FORCED LIMITED RPM. VEHICLE APPEARS TO A FAULTY THROTTLE BODY OR DIRTY THROTTLE BODY WILL NEED TO REMOVE TO INSPECT FURTHER. CUSTOMER REQUESTED TO REMOVE THROTTLE BODY AND REPLACE IT WITH NEW. WHILE THROTTLE BODY WAS REMOVED ALSO REMOVED INTAKE RUNNER VALVE TO MANUALLY TEST RUNNERS ON INTAKE MANIFOLD AND RUNNERS ARE STUCK, WONT TURN BY HAND. RECOMMEND TO REPLACE INTAKE MANIFOLD AND RE CHECKING. REMOVED & REPLACED THROTTLE BODY ASSEMBLY. CHECK ENGINE LIGHT WILL RETURN CURRENTLY IS OFF DUE TO US CLEARING CODES AFTER REPAIRS. 10. Confirm fix: YES Tire Pressure F= 35 R= 35 Complementary inspection Air filter – K&N Cabin filter – N/A Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Tires – RF_0/32____LF_0/32_____RR_5/32_____LR_5/32_____ Tire Date codes – 2018 Visual Brake inspection – F__6MM________R_7MM________
    • THROTTLE BODY ASSEMBLY – Remove & Replace
     
    Tomas G. gave our service a 5 star review on 10/4/2022
  • 2008 Dodge Caliber

    Dodge Caliber
    Mileage
    166,427
    Service Date
    10/4/2022
    Services Performed
    • Complete hookup & analysis on Scope or Scanner 1. Confirm problem : Yes 2. Monitors : Complete 3. Computer codes : P2004, P2118, P2110 4. Mode 6 data: Pass/Fail – Info – N/A 5. Visual test : N/A 6. Engine vac. @ idle : N/A 7. Engine vac. @ 2500 : N/A 8. Smoke test : N/A 9. Diagnostics : SCANNED FOR CODES AND FOUND P2004- INTAKE MANIFOLD RUNNER CONTROL STUCK OPEN, P118- ELECTRONIC THROTTLE CONTROL MOTOR CURRENT PERFORMANCE BANK 1 AND P2110- ELECTRONIC THROTTLE CONTROL SYSTEM BANK 1 FORCED LIMITED RPM. VEHICLE APPEARS TO A FAULTY THROTTLE BODY OR DIRTY THROTTLE BODY WILL NEED TO REMOVE TO INSPECT FURTHER. CUSTOMER REQUESTED TO REMOVE THROTTLE BODY AND REPLACE IT WITH NEW. WHILE THROTTLE BODY WAS REMOVED ALSO REMOVED INTAKE RUNNER VALVE TO MANUALLY TEST RUNNERS ON INTAKE MANIFOLD AND RUNNERS ARE STUCK, WONT TURN BY HAND. RECOMMEND TO REPLACE INTAKE MANIFOLD AND RE CHECKING. REMOVED & REPLACED THROTTLE BODY ASSEMBLY. CHECK ENGINE LIGHT WILL RETURN CURRENTLY IS OFF DUE TO US CLEARING CODES AFTER REPAIRS. 10. Confirm fix: YES Tire Pressure F= 35 R= 35 Complementary inspection Air filter – K&N Cabin filter – N/A Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Tires – RF_0/32____LF_0/32_____RR_5/32_____LR_5/32_____ Tire Date codes – 2018 Visual Brake inspection – F__6MM________R_7MM________
    • THROTTLE BODY ASSEMBLY – Remove & Replace
     
    Tomas G. gave our service a 5 star review on 10/4/2022
  • 2007 Dodge Pickup

    Dodge Pickup
    Mileage
    162,420
    Service Date
    9/13/2022
    Services Performed
    • TRANSMISSION OIL FILTER – Remove & Replace – 4WD – Both
    • Check for rattle under vehicle, gfound LR shock bolt loose – Tighten LR shock bolt and torque,
     
    Dave F. gave our service a 5 star review on 9/19/2022
  • 2013 Dodge Charger

    Dodge Charger
    Mileage
    138,644
    Service Date
    3/23/2022
    Services Performed
    • Confirm Problem: YES. LISTEN TO IDLER PULLEY, DRIVE BELT TENSIONER, WATER PUMP, ALTERNATOR AND A/C BEARING. SLIGHT NOISE COMING FROM DRIVE BELT TENSIONER. MAIN NOISE HEARD IS COMING FROM STARTER GRINDING ON AFTER START UP. RECOMMEND REPLACING STARTER AND DRIVE BELT TENSIONER AND RE CHECKING. REMOVED AND REPLACED STARTER ASSEMBLY. THERE IS STILL A VERY SLIGHT NOISE COMING FROM DRIVE BELT TENSIONER.
    • Air filter – OK Cabin filter -DIRTY Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Transmission fluid level: N/A Transmission fluid condition: N/A Tire Pressure – 35 PSI FRONT AND REAR Tires – RF_9/32____LF_9/32_____RR_9/32_____LR_9/32_____ Tire Date codes – 2021 Visual Brake inspection – F__8MM________R_8MM________
    • STARTER ASSEMBLY – Remove & Replace – V6
     
    Trevor B. gave our service a 5 star review on 3/23/2022
  • 2007 Dodge Pickup

    Dodge Pickup
    Mileage
    116,513
    Service Date
    9/18/2020
    Services Performed
    • Changed oil and oil filter. Lube Chassis & Driveline Check sheet: Transmission fluid: ok Radiator water: ok Windshield wiper fluid: ok Wiper Blades ok Battery water: ok Battery Date code____NA___ Brake fluid ok Hyd. clutch fluid: N/A PS fluid: ok Air filter: ok Cabin Filter: N/A Belts: ok Hoses: ok Shocks & suspension: ok Chassis lubrication: ok Oil leaks: ok Lights: ok Tires: ok Date codes: Tread depth – LF__14___RF__14__LR___14___RR__14__ Air Pressure F=__35____R=___35___ Visual Brake inspection F=__6mm__ R=___5mm__ Oil Sticker: Door RESET OIL LIFE MONITOR___N/A______
    • Inspected vehicle, found spark plugs and wires ok, found battery terminal cables loose, cleaned and tightened battery terminals, checked battery found battery at 12.34volts ok, Found windshield wipers worn. replaced both windshield wipers.
     
    Andrew L. gave our service a 5 star review on 9/23/2020
  • 2006 Dodge Pickup

    Dodge Pickup
    Mileage
    162,285
    Service Date
    7/3/2020
    Services Performed
    • Complete hookup & analysis on Scope or Scanner 1. Confirm problem : YES 2. Monitors : OK 3. Computer codes : P0713- TRANS TEMP SENSOR 1 HIGH 4. Mode 6 data: PASS 5. Visual test : N/A 6. Engine vac. @ idle : N/A 7. Engine vac. @ 2500 : N/A 8. Smoke test : N/A 9. Diagnostics : PULLED CODE P0713- TRANSMISSION TEMPERATURE SENSOR VOLTAGE TO HIGH. CODE SETS WHEN TRANS TEMP SENSOR VOLTAGE GOES ABOVE 3.76V (HOT) FOR 2.2 SECOUNDS, WHEN CODE SETS PCM WILL USE A FORMULA DERIVED FROM ECT VOLTAGE AS DEFAULT VALUE FOR TRANS TEMP. IF TRANS TEMP READS ABOVE 266 DEGREES OVER DRIVE WILL BE DISABLED. TCC SOLENOID WILL GO OPEN. DISCONNECTED 23 WAY CONNECTOR AT TRANS, GROUNDED TRANS TEMP SENSOR CIRCUIT, VOLTAGE READS 0 WHICH INDICATES WIRING FROM CONNECTOR TO PCM OK. OHMS TESTED DARK GREEN AND ORANGE WIRE FROM CONNECTOR TO PCM., READS 0.2, GOOD VOLTAGE AT SENSOR WHEN CONNECTED IS 5V, INDICATING SENSOR OR WIRING INSIDE OF TRANSMISSION IS BAD. REMOVED TRANSMISSION OIL PAN AND REPLACED TRANSMISSION TEMPERATURE SENSOR, ALONG WITH TRANS FILTER AND PAN GASKET. FILLED TRANS WITH FLUID AND MONITORED SENSOR WHILE ON TEST DRIVE. SENSOR NOW READS 2.3 VOLTS WITH NORMAL RANGE DURING TEST DRIVE. TRANS SHIFTS INTO ALL GEARS AND OVERDRIVE WORKING AT THIS TIME. 10. Confirm fix: YES Tire Pressure F= 65PSI R= 65PSI Complementary inspection Air filter – OK Cabin filter – OK Belts – OK Hoses – OK Engine oil – OK Engine coolant – OK Tires – RF__8/32 LF__8/32 RR__8/32 LR__8/32 Tire Date codes – 2019 Visual Brake inspection – F___7MM R___5MM
    • FLUID TEMPERATURE SENSOR – Remove & Replace – 4WD – [Includes: R&I Valve Body Assembly.]
     
    Kate D. gave our service a 5 star review on 7/3/2020